10045215
WINS external liquid foil 600ml
It creates a vapour-permeable coating, which regulates the migration of moisture from the window gap to the exterior of the building, eliminating foam degradation:
- resistance to extreme weather conditions,
- 10 years of UV resistance,,
- tightness.
Functional external area
Technical specification
WINS external liquid foil for window insulation window is a ready to use, one-component product forming a vapour-permeable coating (area 1), which regulates the migration of moisture from the window gap to the interior of the building, eliminating foam degradation (area 2). It is chemically neutral and adheres to most construction materials. It creates a flexible and vapour-permeable coating. Thanks to its flexibility, it is perfect for sealing frame-to-reveal joints in WINS systems where there is usually little displacement.
The coating in combination with the WINS Flex or WINS Fast insulating foam and WINS external liquid foil creates a water and wind resistant joint between the frame and the reveal, preventing energy losses and the possibility of humidity and mould formation. The joint sealed with WINS liquid foil is resistant to adverse weather conditions including hurricanes up to 160 km/h. Special WINS external liquid foil for sealing windows is reinforced with polymer fibres and provides a very high - 10 years - UV resistance.
| Parameter | Value |
|---|---|
| Colour | White |
| Width of the expansion joint: | min. 10 mm, maks. 30 mm |
| Zalecana temperatura podłoża przy aplikacji | min. +5°C, maks. +70°C |
| Recommended substrate temperature for application: | min +5°C, maks. +30°C |
| Temperature of use after curing: | +30°C do +80°C |
| Minimum coating layer thickness: | 1 mm |
| Maximum coating layer thickness: | 3 mm |
| Curing time in temperature min. +5°C, 50% RH: | 1 mm / 5 h |
| Curing time in temperature min. +23°C, 50% RH: | 1 mm / 60 minut |
| Curing time in temperature max. +30°C, 50% RH: | 1 mm / 50 minut |
| Equivalent diffusion resistance factor Sd: | < 2 m |
| Longitudinal tensile strength: | 1,31 MPa, ISO 527-1 2012 |
| Relative elongation at break – longitudinal: | 720%, ISO 527-1 2012 |
| Resistance to UV radiation: | 10 lat |
| Storage temperature: | +5°C do +30°C |
| Clean | The fresh material is removed with water and the cured one – mechanically |
