10045189
WINS Fast gun foam
The Tytan Professional WINS Fast foam is a new generation of high performance polyurethane foam for gun application:
- very fast installation,
- high yield over 70l,
- complete curing after 1.5 hours.
Functional insulation area
Technical specification
Tytan Professional WINS Fast foam is a polyurethane insulation foam with very good thermal insulation and extremely fast curing time, reduced post-expansion as well as high yield. It is resistant to mould and fungus formation. Able to compensate for structural displacements. Compatible and adhesive to substrates made of aluminium, PVC, wood, silicates, concrete, cellular concrete, ceramic hollow bricks, brick, plaster, etc.
It is an excellent solution for joinery installation. Due to the new technology, the working time of the installer can be significantly reduced - the layer of applied foam can be processed as early as approx. 10 minutes after the application. WINS Fast foam is a foam specially designed for the WINS Fast system and together with liquid foil coatings on the inside and outside, it creates excellent insulation and sealing of the joint between the frame and the reveal.
| Parameter | Value |
|---|---|
| Thermal conductivity coefficient λ | 0,036 W/mK |
| Acoustic insulation | ≤ 62 dB |
| Width of the expansion joint | min. 10 mm, maks. 30 mm |
| Recommended substrate temperature for application | min. +5°C, maks. +30°C |
| Recommended substrate temperature for application | min. +5°C, maks. +30°C |
| Skin formation time (+23 °C / 50% RH) | 3 minuty |
| Open time (+23 °C/ 50% RH) | 10 minut |
| Full cure time (+23 °C/ 50% RH) | 1,5 h |
| Yield (free foaming) | do 70 l |
| Yield in gap | for 45 l |
| Foam expansion (post-expansion) | 30 – 50% |
| Flammability class | B3 |
| Sustainability and hazardous substances | Does not contain CFC, HCFC, does not emit TVOC, MDI, ammonia, formaldehyde; does not affect the ozone layer |
